Reset Waste Ink full canon
1) Enter SERVICE MODE. By pressing Menu Copy Scan Copy Copy
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [Set] key.
7) Press the [Stop/Reset] key (returning to the state of
3)), and then press the [ON/OFF] key
Sunday, February 24, 2008
Reseter Canon MP190
Dear all reseter's
Subscribe to:
Post Comments (Atom)
Reset Code waste ink counter for Canon Multipass F20:
ReplyDelete1) Enter SERVICE MODE. By pressing Menu, Copy, Scan, Copy, Copy
2) Select TEST MODE using the + or - buttons.
3) Select [8] PRINTER TEST in TEST MODE (using the + or - buttons) and press SET. Please Wait
4) Select 8 - 3 using + or - keys and press SET.
5) Display shows [0] INK COUNT , Press SET
Once Please Wait disappears, press STIOP/RESET, then the On/Off button to exit Service Mode.
This reset is of MPC190, no MP190
ReplyDeleteWhat is the reset for MP190?
ReplyDeleteThe reset above is not for theMP190 but for the MPC190
ReplyDelete