Do it yourself Inkjet and Laser Printer Repair: Reset Canon ip1880 dan 1100 dan 2500

Friday, April 4, 2008

Reset Canon ip1880 dan 1100 dan 2500

For the user of printer IP1880 and like refill cartridge and it was blinking, Here the software and tools to reset the printer . As information, this resetter could not change ink level status indicator. Perhaps there was design like this from Canon . So the method was disappear indicator for ink level.

First download the software here, then follow these instruction.
1. Driver must be install corectly.
2. Connect the cabel
3. Then, before you take power cable
press and hold power button and put power cabel to electrict
4. Hold power button, press reject button twice then let the power button.
5. do the reset program you've been download.
6. Don't forget to open Lock Release in program
( Note : To see lock release menu, min your window resolution is
1024 x 728 )

7. then choose set destination to ip1880
8. Check CLEANING and EEPROM CLEAR
9. then click MAIN and PLATEN
10.if you done the step above, then do TES PATTERN1

Note : The step above could be use to IP 1100, 1800 and 2500 series How to reset is same.
Download Reset Canon Ip1880 Download

9 comments:

Anonymous said...: Please can you give me a site where I can download in English.
Thanks,
Mr.john; January 10, 2009 4:01 AM
Anonymous said...: thanks reset nya sangat membantu sekali; February 21, 2009 8:01 PM
Anonymous said...: For more details and download,

(Resetter Canon iP1600, Reset Epson C58, Reset CX6500, CX1500 Resetter, Reset Canon i6100, MPC110 Reset Procedure, Resetter CX4100, Canon iP1700 Ink Waste Resetter, Reset Canon iP1880, CX2800 Resetter, Canon MP150 Reset Codes.); March 2, 2009 4:29 AM
Anonymous said...: For more details and download,

(Resetter Canon iP1600, Reset Epson C58, Reset CX6500, CX1500 Resetter, Reset Canon i6100, MPC110 Reset Procedure, Resetter CX4100, Canon iP1700 Ink Waste Resetter, Reset Canon iP1880, CX2800 Resetter, Canon MP150 Reset Codes.); March 2, 2009 4:30 AM
Anonymous said...: I WANT THE RESET FOR CANON IP4200 IS ONE OF THE LATEST MODELS OF CANON, THE CARTRIDGE IS ALSO CARRING A CHIP.PLEASE HELP MEEEE....; March 2, 2009 9:27 PM
Anonymous said...: Waste Ink Counter Reset.
Step Manual Temporary
1. Unplug power and USB.
2. Open door and hold power button.
3. Connect power.
4. Close door, then release power button.

or

Step 1: Manual Temporary
1. Turn off the printer. And disconnect the printer cable.
2. Press and hold the POWER button, turn on the printer.
3. The indicator (L.E.D.) should be green.
4. Press and release the RESUME button , the indicator (L.E.D.) should be orange.
5. Press and release the RESUME button again, the indicator (L.E.D.) should be green.
6. Release both buttons.

step 2 : Software for Permanant
1. Reconnect the printer cable.
2.Open General Tools software and select (USB PORT)
3.Choose (SET DESTINATION 1) And it should be reset.; March 12, 2009 2:19 AM
Anonymous said...: Power off printer
Hold down STOP/RESET button then Press and Hold down Power button
Keep Power button down and Release STOP/RESET button
Release power button
Push STOP/RESET button twice
Wait 20-30 seconds - our LED showed Idle
Push STOP/RESET button four times
Push Power button twice
Power off
Next time the printer is started the waste count will have been reset; August 12, 2009 11:10 PM
Anonymous said...: Error: The following ink cartridge is not recognized.
Black (40/830) Color (41 & 831)

Means: Cartridge cannot be used anymore, or chips is destroyed.
Questions: Is there any ways that this problem can be fixed?

Error: Paper is jammed.
I try printing and this error automatically comes out.
Questions: How can i fixed this? Any help out there.

Error: Waste tank absorber is full,,,etc...
When I print this error comes out, but what makes me confused is that my printer lights only the green light flashing while the orange light does not (resume button)...Somebody told me that that the printer lighs orange or red to sign that there is a problem error.

Questions: I used waste tank absorber resetter software and it hungs my computer, I try using the manual resetting, but does not work either. help me please...

thank you in advance...; August 12, 2009 11:11 PM
Anonymous said...: Thank you
You saved me from the frustration I have been experiencing the past few weeks.; August 12, 2009 11:12 PM