Epson Stylus Color C20,C40

Service (Adjustment) Programs

Since your printer consumes ink not only for printing but also for other operations like cleaning, a certain amount of ink is wasted and it is collected by the waste ink pad. Therefore, the printer counts the amount of waste ink.
Once the amount of waste ink reaches the predefined limit, the printer indicates "MAINTENANCE REQUEST" and the waste ink pad should be replaced. Also, you must reset the maintenance error condition and the waste ink counter value stored in EEPROM on the mainbord of the printer.

The adjustment program enables you to perform maintenance and adjustment functions such as:

- EEPROM initial setting
- Ink Pad Counter reset
- Initial Ink Charge
- Head ID Setting
- Top margin Adjustment
- Bi-D Adjustment
- USB ID Input

Note: The above list is related to models Epson C20 and C40 only. Other printer models may have different set of functions, and you must doublecheck the service manual for a specific printer that you are going to troubleshoot.Warning: misuse of a program may damage printer's EEPROM! Under Window 98 only.

This service program can be Adjustment program epson downloaded FREE!

Today you can download FREE Service Programs:

Epson Stylus Color C41, C42 printer service program (under Windows 98 only) download (462kB) FREE!Epson Stylus Photo 900 printer service program (under Windows XP, 2000) download (571kB) FREE! Stylus Epson Stylus Color C60 printer service program (under Windows 98 only) download (609) FREE!

sumber: 2manuals.com

Reset printer Canon i850, i950, S600

Dear all reseter's

Start with the printer OFF
1. Hold down RESUME and then hold down POWER
2. release RESUME
3. press RESUME twice, then release POWER
4. Let green light blink until printer is done futzing Select function with RESUME press POWER to execute: presses - light color - function

Number of presses - light color - function
0 presses - green - Test print (or exit service mode on i960)
1 press - orange - EEPROM info print (plus grid nozzle diagnostic on i960)
2 presses - green - EEPROM initialize
3 presses - orange - Reset waste ink counter

reset canon BJC 1000 Series

Dear all reseter's

Canon Waste Ink Tank Reset Procedures
1: Remove Cartridge2: Unplug the AC Power Cord
3: Hold down the RESUME button
4: Release RESUME after plugging in the AC Power cord.
5: Press the RESUME once within
5 seconds and release the RESUME .
6: Press and HOLD RESUME for two seconds or more and release it.
7: Press and HOLD RESUME for two seconds or more and release it.
8: Unplug AC Power Cord to set data.

Reset printer Canon BJC-2000 BJC-2100

Dear all reseter's

Reset Waste Ink Canon
1. Remove the Cartridge
2. Unplug the AC Power Cord
3. Close Front access panel
4. Hold down the RESUME/RESET button and plug in the AC power cord
5. Release RESUME/RESET after plugging in the AC Power cord.
6. Press the RESUME/RESET once within
7. Seconds and release the RESUME/RESET .
8. Press and HOLD RESUME/RESET for two seconds or more and release it.
9. Press and HOLD RESUME/RESET for two seconds or more and release it.
10.Unplug AC Power Cord to set data.

SSC Service Epson

SSC Service for Epson Stylus Printers.Main features.
SSC Service allow you to do many amazing things with Your Epson printer :

1) Work directly with CSIC in Epson Stylus printers cartridges.
2) Reset or rewrite any chip using special addon device.
3) Freeze internal ink counters.
4) Reset internal ink counters even with empty cartridges.
5) Separate cleaning of color and black heads for all Epson inkjet printers,
powerful cleaning mode.
6) Hot swapping of cartridges supported.
7) Resetting of protection counter (even then it is already full).
8) More then 100 different Epson printers supported

This allow many people with high printing demands to save some money (program works with both black and color cartridges).Up to day this software works under Windows 95/98/ME/2K2/XP with both the LPT and USB printers.NOTE ! You can lost Epson lifetime guarantee on print head by refilling ink cartridges!Please, read all instructions in help file before doing anything with Your printer!Please, post filled test report form generated by the program (test report button) to us in case of any software problem or if Your printer is unsupported by this software (read instructions how to make test report in this case in help file) !Program screenshots:

Click picture to EnlargeThis menu can be accessed by right clicking on the application icon located in tray.

NOTE!

1) This is freeware project, so it is illegal to take money for this software.

2) Distribution of this software from any site other then www.ssclg.com or one of our official partners sitesis prohibited!(с) 2002-2007 SSC Localization Group

ssc service download ssclg.com

Reseter Canon MP190

Dear all reseter's

Reset Waste Ink full canon
1) Enter SERVICE MODE. By pressing Menu Copy Scan Copy Copy
2) Select TEST MODE.
3) Select [8] PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [Set] key.
7) Press the [Stop/Reset] key (returning to the state of
3)), and then press the [ON/OFF] key