Canon Pixma iP1980

CanonPixma iP1980 printers have the same problems and complaints with the Pixma iP1880. So if you have some problems with the printer Pixma iP 1980, try to use the General tool (Resetter) Canon Pixma iP1880 Printer. Trust me, this resetter would work well. Try it and Good Luck.

These are the steps:
1. Turn On iP1980
2. Push and Hold Resume button about 2 minutes
3. Release Resume button
4. Printer back to normal again

To get Permanent , follow the steps here :
Manual Resetter canon Pixma iP1980/1900 Download

Resetter canon Pixma iP1980/1900 Download

Resetter canon Pixma ALL type IP Download

Epson Stylus C91, Epson Stylus C92

Service Adjustment Program

To reset waste ink pad counter epson C91 orepson C92 printers you have to:
- Run the program
- Choose Particulare Adjustment Mode - Choose Waste Ink Pad Counter
- Press INITIALIZE!
Here it is! The waste ink counter resets to ZERO!

Download Zip file (648 kB) after on-line payment and unzip it by WinZip. Run AdjProg.exe file!

Stylus photo C91,C92 download

Epson Stylus R200

Service Manual Epson Stylus Photo R200-R210

1. Troubleshooting.
2. Disassembly and Assembly.
3. Adjusments.
4. Maintenance.
5. Appendix.

DOWNLOAD RESETTER PRINTER EPSON STYLUS PHOTO R200 R210 Download Free

Resetter canon i255

Waste Ink Counter Reset.

Step 1 : Manual Temporary Only

1. Copot kabel power dan kabel USB.

2. Buka pintu dan tekan/tahan tombol Power.

3. Colokin kabel power.

4. Tutup pintu, kemudian lepas tombol Power

For Reset by software

or Step 1: Manual for service mode

1. Turn off the printer. And disconnect the printer cable.

2. Press and hold the POWER button, turn on the printer.

3. The indicator (L.E.D.) should be green.

4. Press and release the RESUME button , the indicator (L.E.D.) should be orange.

5. Press and release the RESUME button again, the indicator (L.E.D.) should be green.

6. Release both buttons.

step 2 : Software for Permanant

1. Reconnect the printer cable.

2. Open General Tools software and select (USB PORT)

3. Choose (SET DESTINATION 1) And it should be reset.

Remark “After service mode Pls use software for permanent reset”

Download Link :

Manual reset i255-i355.pdf
Reset Tool i355, i250, i255.zip

Canon S450 Color Bubble Jet

1. Power off printer

2. Hold Resume button then press and hold POWER, the beeper will sound once.

3. Hold POWER and release RESUME

4. Press RESUME twice

5. Release Power button

6. When the indicator lights steady, press RESUME three(3) times. The indicator should be orange.

7. Press Power to set data