Friday, December 25, 2009

Ink Absorber Is Full Canon IP 1880









BLINKING 2

Out of Paper or Paper feed error
BLINKING 3
Paper Jam
BLINKING 4
Tinta cartridge was out
BLINKI NG 5
Cartridge unknown
BLINKI NG 7
Posisi Cartridge isnot right
BLINGKING 8
Ink absorber full
BLINKING 14
Cartridge unknown

1.) Download ip tool (software for reset waste ink tank)
2.) Unplug the printer power cable. Then hold the power button, while the power cable plug into an electric current, press the resume button once (the power button is pressed ) emerging power button, until this process will be a normal printer, it can be used for printing,
Note:
1. Generator tool can use after printer doesnot blinking / green led
2. Choose usb port,
3. Don’t forget to click Lock Release button then Set Destination pilih 1800 (ASA)
4. Check Cleaning and EPROM Clear
5. Take a paper, click test pattern 1, usually at this process printer back blinking orange
and then in a moment back normally (green led)
6. The end step click Klik tombol Main and Pattern button.
7. To make sure printer is ok, click EPROM information , see the CLTime. characteristic of the printer must be reset, the date on CL Time shows the current date.If it has reset the date has changed.

The second way to reset the IP1980 and the like, pull your printer cartridge and replace it with a still normal cartride thus the printer will recognize the new cartridge.

The third way of using software IPTools
iP Tool is a for Canon resetter iPxxxx type.


Error code Canon IP1300, IP1700, IP1200, IP1880, IP1980

3x orange 1x green = mechanic error

4x orange 1x green = absorber full /reset with general tools

5x orange 1x green= cartirdge black/colour has problem

7x orange 1x green = cartirdge black/colour has problem

8x orange 1xgreen = absorber full / reset with general tools

12x / 15x orange 1x green = cartridge detection


12 comments:

  1. hey anonymous :)
    problem solved!
    thanks!!!!!!!!!!!!!!!!

    so this was great!!!

    spent over 50 bucks and printer blink 7.the probles was from your printer ,not you ink cartridges,Do u try this,open your printer cover, take out ac power plug,take out both inks cartridges,plug ac power back,replace inks,turn on power, It willbe Ok.
    If u still have same poblem, then u need try as below setting.
    1.Press Resume button hold for 1 - 2 minutes (count to 1 to 15-16)
    2.Open the cover right away
    3.Release Both catridges out and then put catridges them back again
    4.Close The Cover
    5.Turn Off Then Turn On again.

    ReplyDelete
  2. 1. With the printer plugged in and powered off, press and hold the Resume/Cancel button, then press and hold the Power button. (DO NOT release the buttons. The LED light should be green to indicate that a function is selectable.).
    2. While holding the Power button, release the Resume/Cancel button. (DO NOT release the Power button.).
    3. While holding the Power button, press the Resume/Cancel button 2 times, and then release both the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the LED lights alternately in orange and green, starting with orange.).
    4. When the LED light is green, press the Resume/Cancel button 4 times. (Each time the Resume/Cancel button is pressed, the LED lights alternately in orange and green, starting with orange.).
    5. Press the Power button. The LED lights in green, and the reset is performed. (When the operation completes, the printer returns to the menu selection mode automatically.).
    6. Press the power button to exit service mode.

    ReplyDelete
  3. Resetor for pg40 cl41...let me know if some one knows...

    1. Press Resume button hold for 1 - 2 minutes (count to 1 to 15-16)
    2. Open the cover right away
    3. Release both cartridges out and then put cartridges them back again
    4. Close the Cover
    5. Turn Off Then Turn On again.
    Will be working again.

    ReplyDelete
  4. How to reset ink level on Canon Pixma iP1800

    1. Press Resume button hold for 1 - 2 minutes (count to 1 to 15-16)
    2. Open the cover right away
    3. Release both cartridges out and then put cartridges them back again
    4. Close the Cover
    5. Turn Off Then Turn On again.
    Will be working again.

    ReplyDelete
  5. Reset Canon PIXMA iP1980 / 1880

    BLINKING 2
    Out of Paper or Paper feed error
    BLINKING 3
    Paper Jam
    BLINKING 4
    Tinta cartridge habis
    BLINKI NG 5
    Cartridge tidak dikenali
    BLINKI NG 7
    Posisi Cartridge tidak tepat
    BLINGKING 8
    Ink absorber penuh
    BLINKING 14
    Cartridge tidak dikenal

    ReplyDelete
  6. Solusinya adalah menggunakan program Resetter Printer Canon IP 1980. Langkah-langkah mereset Canon IP 1980 adalah sebagai berikut:

    1. Tekan tombol Power lalu tancepin kabel AC connector ke steker lalu lepasin jari dari tombol power
    2. Tekan tombol Power lagi untuk menghidupkan printer
    3. Buka program iptool.exe
    4. Disana ada 2 menu, Ink Counter dan Waste Ink Counter
    5. Pada kotak menu Ink Counter klik Reset Black dan Reset Colour
    6. Lalu pada Waste Ink Counter klik Reset Main dan Reset Platen
    7. Matikan printer Canon IP 1980 kamu.
    8. Lalu nyalakan kembali printer. Printer kamu akan kembali normal

    ReplyDelete
  7. CARA RESET Canon iP1980
    CARA RESET Canon iP1980

    Untuk melakukan Ink Full Tank Resetter pada IP 1980 biasanya lampu indikator pada power dan resume berkedip-kedip berulang kali bila itu terjadi lakukan langkah berikutnya :

    1. Hidupkan printer Canon iP1900
    2. Tekan dan tahan tombol Resume selama 2 menit.
    3. Lepaskan tombol Resume.
    4. Printer akan normal kembali.
    5. Apabila masih belum normal juga, lakukan langkah sebagai untuk reset manual dan Reset Sofware

    Langkah Reset Manual

    1. Colokan kabel power Printer dalam keadaan lepas
    2. Tekan dan tahan tombol power dengan jari telunjuk anda kemudian masukan kabel power
    3. Tombol power masih ditahan, kemudian jari tengah andah pencet tombol resume sebanyak dua kali.
    4. Lepas tombol power
    5. Printer sudah tidak berkedip-kedip
    6. Pada tahap ini anda sudah selesai melakukan langkah Reset Manual
    7. Agar permanen silahkan gunakan Reset Sofware.

    ReplyDelete
  8. it works thanks a million...

    ReplyDelete
  9. This one actually works. Saved me from buying a new printer in the middle of hell week. Thanks!

    ReplyDelete
  10. Apa iptool yg disediakan hanya untuk ip1800??

    Atau bisa juga untuk ip1900 atau ip1980?
    tolong solusinya..

    ReplyDelete
  11. GAN...saya mengalami masalah ma printer canon IP 1880, saya punya kompi n laptop, saya coba di kompi dengan Office 2010 lancar2 ja gan...tapi setelah saya coba di laptop dengan Office 2007, jalan lancar2 ja tapi sama sekali tidak kluar tulisannya/tintanya GAN...Tolong solusinya GAN....????

    ReplyDelete

Service manuals and repair information about laser, dot matrix, label printer and ink jet printers of different makes: HP, Canon, Epson, Ricoh, Star, Xerox, Okidata