Waste Ink Counter Reset.
(1) Turn off the printer.
(2) Press and hold the RESUME button, then press and hold the POWER button.
(3) Release the RESUME button, Next press and release the RESUME button two(2) more times in
succession. Note: you are still holding the POWER button). The printer's carriage will "reset"
or move momentarily. If the above was properly performed the printer will enter the
"Service Mode".
(4) Press the RESUME button 4 times, this will select the clear waste ink counter function. The lamp
will alternate (change) color with each key press.
**********
1. Service/Factory test printout, including ink sensor check.
2. EEPROM - Info printout.
3. EEPROM - Initialization.
4. Reset the Waste ink counter.
5. Printer model setting. (More selections beyond this point - However it is best leave them unaltered - You have been warned!)
**********
After selecting the desired mode (eg 4), press the POWER button to "set" the change, and return to the top of the function selection menu. Press the POWER button again to restart the printer.
------------------------------------------------
I have tried the above steps, all steps were perform correctly; BUT I am still not able to reset the "color Ink low" message. Please HELP.
Canon MX310 Office All-In-One Printer Reset ink canon mx318
ReplyDeleteReset Waste Ink Canon MX318 Why to Reset Waste Ink Counter on Canon MX318. thanks
ReplyDeleteReset Waste INk Canon MX318
ReplyDeleteReset Waste INk Canon MX318 My Printer Canon MX318, wast full waste ink absorber and...
Error Message: Check Ink U051,U059 Jan 18, '09 6:03 PM
ReplyDeletefor everyone
Description:
Cartridge Error,Cartridge not installed,Non supported cartridge is installed
Error Code appears in Monitor:
1401,1485
Related Models:
MX308,MX318, etc
Summary:
This message appears when the cartridge not installed, not properly installed, or non supported cartridge is installed.
As a result the printer cannot recognized the installed cartridge.
Remedial action:
* Reinstall the cartridge properly
* Ensure that you installed supported cartridge only
* Replace the cartridge
MX318Waste Ink Counter Reset.
ReplyDelete(1) Turn off the printer.
(2) Press and hold the RESUME button, then press and hold the POWER button.
(3) Release the RESUME button, Next press and release the RESUME button two(2) more times in
succession. Note: you are still holding the POWER button). The printer’s carriage will “reset”
or move momentarily. If the above was properly performed the printer will enter the
“Service Mode”.
(4) Press the RESUME button 4 times, this will select the clear waste ink counter function. The lamp
will alternate (change) color with each key press.
1. Service/Factory test printout, including ink sensor check.
2. EEPROM - Info printout.
3. EEPROM - Initialization.
4. Reset the Waste ink counter.
5. Printer model setting. (More selections beyond this point - However it is best leave them unaltered - You have been warned!)
After selecting the desired mode (eg 4), press the POWER button to “set” the change, and return to the top of the function selection menu. Press the POWER button again to restart the printer.
hhm someone copy paste my blogpost into comment.
ReplyDelete'Error message:...
Description...
Error code appear on monitor..
Related models: ...
Summary:...
Remedial action:.."
that's all my post in www.printerclinic.info. No problem..
Dear Bro..,
ReplyDeleteYour solution bout "waste ink at MX308" is very helpfull.
Thank GBU.
Can you help me for error masage 5200 for mx328? what should i do?
ReplyDeletemy canon mx318 shows "check ink colour" after i resette..please help me to fix this problem
ReplyDeletemy canon mx318 shows "req.service soon" and now its " check printer" I couldnt use the printer anymore.Please help me with this.
ReplyDelete