Canon PIXMA® MP220 All-In-One InkJet Printer
Consumer Rating:
This standard photo all-in-one is ideal if you want to print, copy and scan at home. You can print from your memory card without a PC, thanks to the two-line LCD display .
See product details
Methods how to reset
1. Turn off the printer
2. Hold the Resume Button (red circle in the triangle),
add a printer (click “Power”) an indicator light green.
3. Hold the Power Button, release the Resume Button.
4. Not releasing the Power Button, double click “Resume” and release Both Buttons.
5. Click “Resume” for Four times
6. Once you click “Power”, to confirm the selected action (reset counter absorber). To disable the printer “Power” button to click again.
Reset Printer Canon MP140, MP160, MP180, MP210, MP220, MP460, MP470, MP500, MP510, MP530, MP600, MP610, MP800, MP820, MP810, MP830, MP960, MP970
ReplyDelete1. Turn off the printer
2. Hold the Resume Button (red circle in the triangle), add a printer (click “Power”) an indicator light green.
3. Hold the Power Button, release the Resume Button.
4. Not releasing the Power Button, double click “Resume” and release Both Buttons.
5. Click “Resume” for Four times
6. Once you click “Power”, to confirm the selected action (reset counter absorber). To disable the printer “Power” button to click again.
I had the same problem...
ReplyDeleteI tried everything posted here and other forums with no succes..
Until I found a solution for Canon MP-160:
MP-160 is different from MX300 so I tried my best with it...
The main solution is to reset the entire printer:
1. Disconnect the power cable
2. Connect it while holding down the power button
3. With the power button still down, press twice the "Cancel/Stop" red button
4. Release the power button
5. The printes turns into a kind of factory mode...(wait for about 10 seconds, utils it says "Idle")
6. Press the ">" (next to the "OK" button) once."Shipping Mode 3"
7. Press the "OK" button.
8. Press "OK" again for "Without cleaning"
9. A test page will print..
10. Open the cover, like you are about to change the cartridges.
11. Disconnect the power cable again.
12. Take out both cartridges.
13. Close the cover.
14. Connect the power cable once again.
15. Turn the printer on.
16. Now just put the cartridges back...
It works right for me...
How to reset E,2,7 on Canon MP198
ReplyDelete1. Start with printer OFF
2. Hold down RESUME and then hold down POWER
3. Release RESUME
4. press RESUME twice, then release POWER
5. let green light blink until printhead has finished moving.
6. Select functions below with RESUME, execute with POWER
0 presses - green light - Test Print (exit service for i960)
1 press - orange light - EEPROM info print
2 presses - green light - EEPROM initialise
3 presses - orange light - reset waste ink counter.
This also applies to the i550, i560, i950, i960
i850 blinking 7 times i waste ink full..but clear the reset the waste ink counter is 4 times not 3..=.= i know some manual is say 3 times but actually is 4..
1. Start with printer OFF
2. Hold down RESUME and then hold down POWER
3. Release RESUME
4. press RESUME twice, then release POWER
5. let green light blink until printhead has finished moving.
6. Select functions below with RESUME, execute with POWER
now try press resume button 4 times..after that press the power button
i850 blinking 7 times i waste ink full..but clear the reset the waste ink counter is 4 times not 3..=.= i know some manual is say 3 times but actually is 4..
1. Start with printer OFF
2. Hold down RESUME and then hold down POWER
3. Release RESUME
4. press RESUME twice, then release POWER
5. let green light blink until printhead has finished moving.
6. Select functions below with RESUME, execute with POWER
now try press resume button 4 times..after that press the power button
I think I can clear up some of the problems that people are having using this function. What you are doing is forcing the printer into "Service Mode". Here is how you do it. Read this entire post and understand it before you try it.
1. Start with printer OFF
2. Hold down RESUME and then press and hold down POWER Button.
3. Release the RESUME but continue to hold down the power button
4. Press the RESUME twice, then release POWER button.
Now you have put the printer in Service Mode so it will accept Service commands. Here is the list of Service commands;
A. Press the Resume button once = Print Service test print
B. Press the Resume button twice = Print EEprom data sheet
C. Press the Resume button Three = Initialize the EEprom
D. Press the Resume button Four = Clean Waste INk Counter
E. Press the Resume button Five = Change Destination settings
F. Press the Resume button Six = Head Refreshing (Cleaning)
G. Press the Resume buttom Seven, Eight, Nine, = Not used
H. Press the Resume button Ten = Return to selection Menu
To EXECUTE anyone of the above commands you "MUST Press the Power button one time. Then the function will be executed. After that function has been executed the printer will REMAIN in Service Mode,.. waiting for another command. You can only execute one command at a time. If you are through with all the commands you want to do, just press the power buttom one more time and it will turn the printer off and you will be out of Service Mode. One more note. When you get the printer into Service MOde and it is ready to accept a command, the green light will be on and steady. As you issue a command by pressing the resume button, it will alternate the color from green to orange with each press of the resume button. Remember, if you issue either one of the commands to force a print make sure you have paper installed.
ANKS
This tutorial really helped me in repairing my Canon laser printer.
ReplyDeletewhen my canon mp220 is put in the service mode my display say service mode but pressing the resume does nothing and the display says service mode.The resume butting seems to have no effect on the display.
ReplyDelete