Before doing Resett ,Printer must be Ready (Service mode) , How to service mode;
- Turn off Printer ( POWER + USB cable attached).
- Press and hold RESUME button▼ .
- Press and hold POWER button then free RESUME button But hold POWER button .
- Press RESUME button five times (5x). not 4xprinter will turn off, but temporary.
- Free both of button , the lamp indicator will ready in green /ready (printer will Found new hardware = canon device) Annoy it
- Service tool v_1074.exe
- Pairs of paper in the printer.
- Find CLEAR INK COUNTER colom then click MAIN .
- Printer will print
- Turn off printer.
- Turn on printer .
- Printer is ready for use.
Reset Canon iP2770 error 5200
1. Turn the printer, and printer will look normal.
2. Run the printer for printing documents or print test, then the 5200 error will appear.
3. Jump unplug the power cord without pressing the on-off
4. Open it and slide it into the middle catridgenya manually (press the white penguncinya hook behind the head, for cartridge can be pulled into the middle)
5. Unplug all cartridges and leave the lid remains open
6. Turn the printer, hit the head will move left and right because the lid was still open and will stop in the middle.
7. Replace the cartridge, and close the correct
8. Your printer will return to normal
Download PROGRAM RESETTER CANON IP 2770 V1074