Wednesday, December 29, 2010
1) Enter SERVICE MODE.....By pressing Menu THEN Copy THEN #.
2) Select TEST MODE.
3) Select  PRINTER TEST in TEST MODE.
4) Select 3. [EEPROM CLEAR].
5) Select 0. [INK COUNT].
6) Press the [OK] key. (On F30 printers, skip step (6) since there is no [OK] key .)
7) Press the [Stop/Reset] key (returning to the state of 3)), and then press the [ON/OFF] key.
Thursday, December 16, 2010
Easy method to resset Printer Epson R230X
Download SSC Service Utility software. Click here to get the software.
1. Make sure printer in the living conditions and are connected with a computer
(driver printer sudah terinstall)
2. Instal SSC Service Utility and run the program
3. Setting configuration printer model.Choose Epson Stylus Photo R230. then close the main window.
5. Restart printer, and printer no blinks anymore.
Follow the steps above. I’ve tried myself. Good luck .
Follow these steps :
1 Turn off printer . and free USB cable printer from ur pc ..
2. While printer OFF, press Start button printer . canon another model press Resume button.
3. while press Stop button / continue button / cancel button, press and hold power.
4.while POWER LED green (light) , free Start / Stop button. ( still press POWER button).
5. Press power button , press Start / Stop button to continue/ cancel twice then free power button. Wait till LCD printer display nol ( 0 ) number.
6. Then, afer screen 0, pairs UDB cable printer to ur pc ,de ected a new device will be installed (normal)
Reset Ink counter Printer
7 Download Service_tool to resset.:
Saturday, December 11, 2010
Before doing Resett ,Printer must be Ready (Service mode) , How to service mode;
- Turn off Printer ( POWER + USB cable attached).
- Press and hold RESUME button▼ .
- Press and hold POWER button then free RESUME button But hold POWER button .
- Press RESUME button five times (5x). not 4xprinter will turn off, but temporary.
- Free both of button , the lamp indicator will ready in green /ready (printer will Found new hardware = canon device) Annoy it
- Service tool v_1074.exe
- Pairs of paper in the printer.
- Find CLEAR INK COUNTER colom then click MAIN .
- Printer will print
- Turn off printer.
- Turn on printer .
- Printer is ready for use.
Reset Canon iP2770 error 5200
1. Turn the printer, and printer will look normal.
2. Run the printer for printing documents or print test, then the 5200 error will appear.
3. Jump unplug the power cord without pressing the on-off
4. Open it and slide it into the middle catridgenya manually (press the white penguncinya hook behind the head, for cartridge can be pulled into the middle)
5. Unplug all cartridges and leave the lid remains open
6. Turn the printer, hit the head will move left and right because the lid was still open and will stop in the middle.
7. Replace the cartridge, and close the correct
8. Your printer will return to normal
Download PROGRAM RESETTER CANON IP 2770 V1074