Comments on Do it yourself Inkjet and Laser Printer Repair: PRINTER CANON iP1980 ABSORBER FULL

i will try it...thank you. i had the same problem ...

2011-03-01T00:57:55.346-08:00

i will try it...thank you. i had the same problem on my pixma 1980...

Menurut teman teknisi saya di canon service centre...

2010-10-18T03:18:14.171-07:00

Menurut teman teknisi saya di canon service centre, yang dihitung untuk melihat errornya kadang bukan cuma power berapa kali dan resume berapa kali, tapi yang penting, berapa kali power kemudian resume/alarm, sampai dia jeda/berhenti sejenak

makasih banget untuk infonya...semoga masalah yg s...

2010-05-31T08:01:17.250-07:00

makasih banget untuk infonya...semoga masalah yg sy alami dapat selesai..

Thank you, Thank you, Thank you,

2010-03-25T21:04:48.332-07:00

Thank you, Thank you, Thank you,

Having problem with Canon IP1300, IP1700, IP1200, ...

2010-03-25T21:02:53.212-07:00

Having problem with Canon IP1300, IP1700, IP1200, IP1880, IP1980. Sign that looked to be only led blinking. Following some solutions problem of printer that marked with led blinking.

3x Orange 1x green

Problem : any problem with printer mechanics

Solution: If you don’t have knowledge about printer mechanic, will better if bring the printer to Canon service center.
4x orange 1x green

Problem printer absorber full

Solution: Reset the printer using generaltools or software resetter. If not work using reset manual. Each printers having different set of manual reset

5x orange 1x green

Problem: Black or Color cartridge trouble.

Note: problem is usually caused many matters, for example chips error, conector is dirty, etc.

7x orange 1x green

Problem: Black or Color cartridge trouble.

Note: problem is usually caused many matters, for example chips error, conector is dirty, etc.

8x orange 1x green

Problem printer absorber full (Waste Ink Pad Full)

Solution: Reset the printer using generaltools or software resetter. If not work using reset manual. Each printers having different set of manual reset

CANON RESETTER PRINTER HP EPSON SERVICE MANUAL P...

2010-03-19T02:25:55.469-07:00

CANON RESETTER PRINTER HP EPSON SERVICE MANUAL

Pada Printer Canon Inkjet Type i250, i255, i320, i350, i355, PIXMA ip1000, ip1500 dan sekelasnya, Jumlah pencetakannya akan selalu diakumulasikan hingga batas tertentu. Dan bila sudah mencapai batas yang ditetapkan, maka akan Overload dengan ditandai lampu LED menyala secara bergantian atau disebut dengan BLINKING.

Jika hal ini terjadi, maka Mau tidak mau printer harus dibawa ke service center Canon. Hal ini tidak masalah jika rumah kita Dekat atau satu kota. Lalu bagaimana jika Rumah Kita Di Luar Kota atau bahkan di Luar Pulau?????

Solusinya anda HARUS MEMILIKI SENDIRI software CANON RESETTER

Kabar Baik Untuk ANDA

Kini, anda tidak perlu bingung lagi kemana harus mencari program tersebut. karena semua petunjuk lengkap dan program untuk memperbaiki Printer Canon Anda sudah kami siapkan dan bisa anda Dapatkan SAAT INI JUGA.

Tool ini berfungsi untuk melakukan perbaikan printer-printer berikut:

Canon i250,i255,i320,i350,i355,pixma ip1000/1500, 1200/1700
Canon GENERIC "S" SERIES
Canon i850, i950, S600
Canon S450 Printer
Canon BJC-2000 BJC-2100 Series
Canon BJC-210 BJC-240 BJC-250 BJC-255 BJC-265
Canon BJC-4100 BJC-4200 BJC-4300 BJC-4400 BJC-4550 BJC-4650
Canon BJC-5000
Canon BJC-3000 BJC-6000 BJC-6100 BJC-6200 S400 S450 F300 F600 F620
Canon BJC-7000 BJC-7100 BJC-8000 BJ-F800 i6500
Canon BJC-600 BJC-600e BJC-610 BJC-620
Canon BJC-50 BJC-55 BJC-80 BJC-85 M40 M70
Canon BJ-30 BJC-35v BJC-70 F14 Error Reset
Canon BJ F900, F890, F700, F500, S900, S820, S750 and S520
Canon S9000, S300, S400, i550, i560, i850, i860, i865, i9100, i9950, PIXMA iP3000 above
Canon S900, S820, S750, S520
Canon S9000
Canon MPC190

Berikut ini keluhan-keluhan yang bisa diatasi dengan Canon Repair Utility :

Saya sudah memakai sampai 8 printer, baru beli belum ada 6 bulan sudah error, sama errornya (waste ink full). Bagaimana cara mengatasinya?

Saya pakai ip 1000 malah belum 1 bulan udah error (blinking). Bagaimana mengatasinya?

Saya Punya Printer S200 SPX Mati Total, Tapi Head Catridnya masih bagus. Bagaimana Cara mengatasinya???

Dan banyak permasalahan lainnya yang SANGAT SERING terjadi pada Printer Canon

Inilah solusi yang sudah dibuktikan banyak orang. Gunakan CANON RESETTER. Produk ini merupakan kompilasi beberapa tool resetter yang dilengkapi dengan petunjuk penggunaan step by step yang mudah diikuti. Di dalamnya juga dapat Anda temukan trik service Canon BJC 1000 sampai S200SPX yang mati total tanpa harus menggunakan timah dan solder.

File Canon Resetter ini kami bagikan benar-benar 100% Gratis, Namun kami mohon bantuannya untuk mengisikan komentar anda di buku tamu kami

Ok here is the procedure to reset the inm dupm cou...

2009-12-25T19:06:11.644-08:00

Ok here is the procedure to reset the inm dupm counter but how can reset the ink????

1. With the printer plugged in and powered off, press and hold the Resume/Cancel button, then press and hold the Power button. (DO NOT release the buttons. The LED light should be green to indicate that a function is selectable.).
2. While holding the Power button, release the Resume/Cancel button. (DO NOT release the Power button.).
3. While holding the Power button, press the Resume/Cancel button 2 times, and then release both the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the LED lights alternately in orange and green, starting with orange.).
4. When the LED light is green, press the Resume/Cancel button 4 times. (Each time the Resume/Cancel button is pressed, the LED lights alternately in orange and green, starting with orange.).
5. Press the Power button. The LED lights in green, and the reset is performed. (When the operation completes, the printer returns to the menu selection mode automatically.).
6. Press the power button to exit service mode.

Canon i560 service error 5c00 Waste Ink Counter R...

2009-12-24T18:54:01.851-08:00

Canon i560 service error 5c00

Waste Ink Counter Reset.

(1) Turn off the printer.

(2) Press and hold the RESUME button, then press and hold the POWER button.

(3) Release the RESUME button, Next press and release the RESUME button two(2) more times in succession. Note: you are still holding the POWER button). The printer's carriage will “reset" or move momentarily.

If the above was properly performed the printer will enter the "Service Mode".

(4) Press the RESUME button 4 times, this will select the clear waste ink counter function. The lamp will alternate (change) color with each key press. Next press the POWER button to "set" the change, and return to the top of the function selection menu. Press the POWER button again to restart the printer.

(1) Turn off the printer. (2) Press and hold the R...

2009-12-16T04:33:11.759-08:00

(1) Turn off the printer.
(2) Press and hold the RESUME button, then press and hold the POWER button.
(3) Release the RESUME button, Next press and release the RESUME button two(2) more times in
succession. Note: you are still holding the POWER button). The printer’s carriage will “reset”
or move momentarily. If the above was properly performed the printer will enter the
“Service Mode”.
(4) Press the RESUME button 4 times, this will select the clear waste ink counter function. The lamp
will alternate (change) color with each key press.
1. Service/Factory test printout, including ink sensor check.
2. EEPROM - Info printout.
3. EEPROM - Initialization.
4. Reset the Waste ink counter.
5. Printer model setting. (More selections beyond this point - However it is best leave them unaltered - You have been warned!)
After selecting the desired mode (eg 4), press the POWER button to “set” the change, and return to the top of the function selection menu. Press the POWER button again to restart the printer.