Comments on Do it yourself Inkjet and Laser Printer Repair: Canon PIXMA iP2770

what is error 6000? how to resolve it?

2011-11-15T03:23:39.579-08:00

what is error 6000? how to resolve it?

the dowload not working ...dead link.. please repo...

2011-06-30T19:12:39.037-07:00

the dowload not working ...dead link.. please repost

jangan di infus bro

2011-05-02T07:15:00.238-07:00

jangan di infus bro

gan...ada ga cara biar catridge nya bisa tahan lam...

2011-03-22T10:46:23.236-07:00

gan...ada ga cara biar catridge nya bisa tahan lama...soalnya yang color cepet rusak neh gan

makasih atas infonya

2011-03-05T20:03:54.721-08:00

makasih atas infonya

it didn't work :(

2011-02-28T23:50:23.570-08:00

it didn't work :(

the service tool cannot be use. it hung during a f...

2011-01-07T19:39:03.034-08:00

the service tool cannot be use. it hung during a function is perform.. please help my printer is not working because of the waste ink pad error

Service mode operation procedures : Use the Servi...

2010-09-24T02:29:25.862-07:00

Service mode operation procedures :

Use the Service Tool on the connected computer.

1) Start the printer in the service mode.

i. With the printer power turned off, while pressing the Resume/Cancel button, press and hold the Power button. (DO NOT release the buttons.)
ii. When the Power LED lights in green, while holding the Power button, release the
Resume/Cancel button. (DO NOT release the Power button.)

iii. While holding the Power button, press the Resume/Cancel button 2 times, and then release
both the Power and Resume/Cancel buttons. (Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs light alternately, Alarm in orange and Power in green, starting
with Alarm LED.)

iv. When the Power LED lights in green, the printer is ready for the service mode operation.

2) Start the Service Tool on the connected computer.

i. When a button is clicked in the Service Tool dialog box, that function is performed. During operation
of the selected function, all the Service Tool buttons are dimmed and inactive.

ii. When the operation is completed, "A function was finished." is displayed, and another function can be selected.
iii. If a non-supported function is selected, "Error!" is displayed. Click OK in the error message dialog box to exit the error.

Is this really 2770's resetter?? I though this...

2010-08-24T04:39:42.727-07:00

Is this really 2770's resetter?? I though this was for 1880, but I'm hoping this will work... I will test it on my work office... anyway, thanks for the info...

thanks bro your informations

2010-06-20T02:47:32.456-07:00

thanks bro your informations

help me resetter printer for iR2770

2010-05-31T01:35:31.507-07:00

help me resetter printer
for iR2770