Comments on Do it yourself Inkjet and Laser Printer Repair: Canon mpc190 Error code ##335

Thanks a lot for your help. It works, you saved me...

2009-08-21T08:42:24.346-07:00

Thanks a lot for your help. It works, you saved me from throwing it out!!!!

Mr.Donk

1. Press MENU COPY SCAN COPY COPY 2. This will ta...

2009-08-21T08:41:39.356-07:00

1. Press MENU COPY SCAN COPY COPY

2. This will take you to TEST MODE

3. Use the + key to take you through to PRINTER TEST (option 8)(if you go past, either keep keying the +, or you can use the - to take you back)

4. Ensure that it shows 8-3 on the screen. This is EEPROM CLEAR

5. Press OK

6. It will show 0 INK COUNT

7. Press OK

8. Press the STOP/RESET button

9. Press the ON/OFF button

10. The printer won't turn off, but will "reset" itself (or something).

Canon S900, S820, S750, S520 Turn off the printer...

2009-08-20T07:16:05.427-07:00

Canon S900, S820, S750, S520

Turn off the printer.

Press and hold the RESUME button, then press and hold the POWER button. While still holding the POWER button, Release the RESUME button, then press and release the RESUME button two more times in succession.

The printer mechanics will move momentarily. You are now in Service mode. Release the Power Button. Pressing the RESUME key will select a function; for example, pressing

RESUME 4 times will select the clear waste ink counter function. The lamp will alternate color with each key press.

1. Service/factory test printout, including ink sensor check
2. EEPROM info printout
3. EEPROM initialization
4. Clear the waste-ink counter
5. Printer model setting. (more selections beyond this- leave this alone)

After selecting mode, press the POWER button to commit the change, and return to the top of the function selection menu. Pressing the POWER button again turns off the printer for a restart.

Canon S9000, S300, S400, i550, i560, i850, i860, i...

2009-08-20T07:15:41.407-07:00

Canon S9000, S300, S400, i550, i560, i850, i860, i865, i9100, i9950,

PIXMA IP3000 above,

1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.

Canon GENERIC “S” SERIES RESET CODE Waste Ink Cou...

2009-08-20T07:14:32.229-07:00

Canon GENERIC “S” SERIES RESET CODE

Waste Ink Counter Reset.

(1) Turn off the printer.
(2) Press and hold the RESUME button, then press and hold the POWER button.
(3) Release the RESUME button, Next press and release the RESUME button two(2) more times in succession. Note: you are still holding the POWER button). The printer’s carriage will “reset” or move momentarily. If the above was properly performed the printer will enter the “Service Mode”.
(4) Press the RESUME button 4 times, this will select the clear waste ink counter function. The lamp will alternate (change) color with each key press.

1. Service/Factory test printout, including ink sensor check.
2. EEPROM – Info printout.
3. EEPROM – Initialization.
4. Reset the Waste ink counter.
5. Printer model setting. (More selections beyond this point – However it is best leave them unaltered – You have been warned!) After selecting the desired mode (eg 4), press the POWER button to “set” the change, and return to the top of the function selection menu. Press the POWER button again to restart the printer.